Panels 

Panels

Continuous fence panels are installed to either pipe or wood posts.  If installing to wood posts we use metal clips that screw into place.  Typically posts are set every 10'.  We set our posts, most often using a sack of concrete mix per post.  Once the posts are set depending if you are working by yourself or with help you can attach a come-a-long to post at far end of panel and lift to height.  Installing the panels, as looking at them the verticals go on the outside of fence and horizontals facing the inside.  Routinely we tack weld or attach with one or two clips and move on, later coming back to fully secure fence.  After panel is secured in place move come-a-long to end of next panel, attach and lift into place.  At this point you will fit first panel into second by the connectors, they will slide into place.   Check for height and weld, this will continue down the line.